True
Share :

Borotron® UH020 PE

Unit: Tấm
Price

0,00 0,00 0.0 USD

1 ₫

Total Amount

0,00 0.0 USD

VAT & Shipping fee are excluded in the price
  • Geometry
  • Type
  • Color
  • Size
  • Custom Size
  • Chemical Family
  • Brand

Quantity

Add to cart

During machining of the semi-finished products, evacuate swarf to prevent slipping or tripping hazard and observe the maximum allowable concentration of dust levels on the workplace which apply in your country. Wear safety goggles during machining. The wearing of nitrile RNF 15 gloves and a dust mask class P2 are also advised.
The products shall be stored indoors in a normal environment (air at 10-30°C/ 30-70% RH) and kept away from any source of degradation such as sunlight, UV-lamps, chemicals (direct or indirect contact), ionising radiation, flames, etc. Dimensional changes (camber, warpage, shrinkage ...) of the products as well as slight colour shifts of the external surfaces can occur with time. The latter does generally not pose a problem in case of semi-finished products since the surface-layer is mostly removed anyway upon machining them into finished parts.
Standard industrial safety recommendations shall be observed. Temperatures above the melting temperature shall be avoided.


DATASHEET: DOWNLOAD HERE

Enhanced with 5% elemental boron

 

Very good wear and abrasion resistance

 

Superior impact strength

 

Excellent chemical resistance 

 

Low coefficient of friction 

 

Very low water absorption

 


Alternative Products:

To install this Web App in your iPhone/iPad press and then Add to Home Screen.

Loading..