True
+84 24 3862 6801 |
+84 903 216 001 |
Contact
|  Website
Language:
 | 
  
Home Page
All Products

Material

CPVC HDPE HMW-PE LDPE PA4.6 PA6 PA66 PAI PBI PC PEEK PEI PES PET PI PMMA POM-C POM-H PP PPH PPS PPSU PSU PTFE PU PVC PVDF TPE UHMW-PE

Material

HDPE HMW-PE LDPE PA4.6 PA6 PA66 PAI PBI PC PEEK PEI PES PET PI PMMA POM-C POM-H PP PPH PPS PPSU PSU PTFE PU PVC PVDF TPE UHMW-PE

Material

HDPE HMW-PE LDPE PA4.6 PA6 PA66 PAI PBI PEEK PEI PES PET PI PMMA POM-C POM-H PP PPH PPS PPSU PSU PTFE PU PVDF TPE

Material

UHMW-PE

Material

PE

Material

AISI 304 Acetal Carbon Steel Copper Alloy Galvanized Steel PA6 PEEK PET POM-C PTFE Polyester Rubber UHMW-PE


Self-aligning bearing supports Supporting and levelling components Chains and accessories Other components
LINING SOLUTIONS ENGINEERING PLASTIC PRODUCTS POWER TRANSMISSION & CONTROL CONVEYOR & AUTOMATION SYSTEMS PRODUCTS & MATERIAL SOLUTIONS
Duratron® U2200 PEI
Duratron® U2200 PEI Polyetherimide shapes are 20% glass-reinforced, giving them exceptional rigidity and dimensional stability, high temperature resistance, and a low Coefficient of Linear Thermal Expansion. With an exceptional strength-to-weight ratio and increased tensile strength, this grade is also a great electrical insulator for semiconductor and electronics applications.
Explore 0 products
Duratron® U2200 PEI
Duratron® U1000 PEI
Duratron® U1000 are amorphous PEI Polyetherimide shapes that exhibit high strength, dimensional stability, and superior flame and heat resistance. Due to this grade's ability to perform continuously to 340°F / 170°C, Duratron® U1000 PEI is the ideal solution for applications that require consistent dielectric properties over a wide frequency range. Another strength of Duratron® U1000 PEI shapes are their hydrolysis and chemical resistance, enabling them to withstand repeated autoclaving cycles in medical, pharmaceutical, and biotechnology markets.
Explore 0 products
Duratron® U1000 PEI
Duratron® LSG PEI

The Duratron™ LSG PEI stock shapes are also pre-assessed for biocompatibility for up to 24 hours contact with body and tissue according to USP VI and ISO 10993. Some color variations are also pre-assessed for use in wetted contact applications in bioprocessing.

Combining biocompatibility with peak performance, Duratron™ LSG PEI exhibits outstanding mechanical, thermal, electrical properties, as well as very good resistance to hydrolysis and chemicals.

Duratron™ LSG PEI components are also sterilizable by means of steam (autoclave), dry heat, EtO (Ethylene Oxide), plasma and gamma and X-ray irradiation. Due to these properties, Duratron™ LSG PEI is an excellent candidate for applications in the medical and bioprocessing fields such as trial implants and radiotherapy applicators.

Explore 0 products
Duratron® LSG PEI
Duratron® U2300 PEI
Duratron™ U2300 PEI là chủng loại bán thành phẩm nhựa polyetherimide kháng cháy được phối phương gia cường 30% sợi thủy tinh, cho phép dòng sản phẩm này đạt được độ cứng vững, độ bền cơ học, độ ổn định kích thước và khả năng chịu nhiệt cao nhất trong tất cả các bán thành phẩm Duratron™ PEI. Sở hữu hệ số giãn nở nhiệt tuyến tính (CLTE) thấp nhất, cùng tỷ lệ độ bền trên khối lượng và độ bền kéo vượt trội, chủng loại nhựa này thường được ưu tiên lựa chọn làm giải pháp cho các thiết bị y tế tái sử dụng, thiết bị phân tích kiểm nghiệm, chất cách điện, linh kiện quy trình bán dẫn và các bộ phận cấu trúc đòi hỏi độ bền và độ cứng cao ở nhiệt độ elevated.
Explore 0 products
Duratron® U2300 PEI
Duratron™ U2100 PEI
Duratron™ U2100 PEI shapes are 10% glass-reinforced, giving them greater rigidity and dimensional stability over Duratron™ U1000 PEI. Furthermore, the material shows a low coefficient of linear thermal expansion. With an excellent strength-to-weight ratio and high tensile strength, this Polyetherimide grade is ideal for for semiconductor and electronics applications.
Explore 0 products
Duratron™ U2100 PEI

To install this Web App in your iPhone/iPad press and then Add to Home Screen.
Loading..